Motorcycle headlight
September 6, 2023

Studies show that people subconsciously don't see things they aren't in the habit of looking for. Or, they're distracted by texting, looking at GPS, or checking their hair.

In these situations, a motorcycle rider's best defense is to take active measures to make themselves more visible. Here are a few ways to become more visible while riding your motorcycle.


Riding experts are divided on whether riding with your high beam during the day is a good idea. On the one hand, a high beam can get you noticed more readily by oncoming drivers. On the other hand, if your high beam annoys drivers, you may be doing more harm than good.

Always check your local motorcycle laws to determine if riding with your high beam during the day is legal where you live. If so, ride with your high beam on during the day.


Another way to draw attention to your presence is to tap the brakes once or twice when stopping. The flashing of the brake light helps you stand out when you stop or slow down—even if you're slowing down without using your brakes.

Of course, maximum stopping power is most important in an emergency situation, and a proper emergency stopping technique should override flashing your brake light.


Black is considered fashionable for riders, but white is more visible.

Motorcycle Helmet

If you aren't willing to give up your dark helmet, you can add some reflective tape. You can even buy black reflective tape, so it's barely noticeable in daylight but reflects brightly at night when caught by the light of another vehicle. You don't have to go crazy.

Even a little bit of carefully placed tape can make a big difference.

You might even consider having two helmets in your collection: one that's dark and mysterious for daytime and another that's bright, reflective, and conspicuous for riding at night.

Riding Gear

The same goes for your riding gear. Bright is better. But again, you don't have to sacrifice style for visibility. An easier way to draw attention to yourself is to throw on a brightly colored reflective vest.

You can also look for a riding jacket with built-in reflectivity, riding and rain gear that include 3M™ Scotchlite™ Reflective Material in stripes and graphics that lights up brightly when headlights catch it.

Reflective Tape

While you're at it, you might even consider a little bit of strategically placed reflective tape on your motorcycle itself. Yes, this sounds like blasphemy to some, but when done carefully, tastefully, and subtly, it can add conspicuity to your nighttime rides.


Before riding, also consider the ambient lighting conditions. What's it like outside? Riding at night presents obvious challenges, but so does riding in the fog or riding in the early morning or dusk.

For instance, riding in the fog can be even more challenging than riding at night because you can't count on other vehicle headlights to light up your reflective apparel. Visibility can be reduced to almost nothing, and the road surface is probably damp, which should be factored in when stopping and turning. Sometimes, it might be best to pull over, wait it out, or stop for the night. And remember, don't use your high beam in fog.

Dawn and dusk present the challenge of potentially blinding glare. When the sun is low in the sky, it can blind other drivers, particularly when the sun is behind you.

This can also be true when riding in the winter. The further north you are, the lower the sun gets in the sky, which can cause visibility issues in the middle of the day.

Pro tip: Use extra caution whenever you see your shadow in front of your tire. Assume that oncoming drivers will lose you in the glare and be prepared to stop or take evasive action as needed.


The best place to be is the left third of your lane, or position 1.

This makes you the most visible to oncoming traffic and puts you in the view of the driver's side mirror of the vehicle in front of you. Once you've established position 1 as your home base, you can maneuver within the lane to make yourself more visible.

For instance, imagine riding on a two-lane highway when you see a large truck coming from the other direction. It's a passing zone, so there's a chance a car might pull out to try to get around the truck.

This would be a good time to move to the right side of the lane, position 3, making yourself more visible to any vehicles behind the truck. It also gives you the best opportunity to SEE (search, evaluate, and execute).

Navigating Through Intersections

When making your way through a crowded intersection, make eye contact with drivers who might inadvertently cross your path. This helps confirm that they know you're there. A little nod or quick hand signal can help seal the deal.

Don't assume they've seen you. They might be looking past you. Don't dwell on any one thing. Take everything in. Watch the driver's eyes, watch for tire movement, and keep an eye out for potential conflicts or threats.

Roll off the throttle to create more time to see and be seen. Cover the controls to reduce reaction time. Change lane positions to create a movement that attracts the eye and helps drivers notice you. And don't flash your headlight, as this can sometimes be perceived as a go-ahead signal.

Use A Turn Signal

Always use your turn signal, even when it feels unnecessary—like when leaving your driveway or pulling out of a parking lot onto an empty road. Make it a habit, an automatic action. It's the best way to ensure you'll remember to signal when it matters most.

Use The Horn

A well-timed beep of your horn is another effective way to get noticed. Don't overdo it, of course. Using your horn gratuitously is obnoxious and harms rider-driver relationships.


So, what is an LED?

A light-emitting diode, or LED, is a type of solid-state lighting that uses semiconductors and electroluminescence to create light. The LED as we know it has been around for more than 50 years; in fact, its origins date to 1907, when H.J. Round discovered electroluminescence by experimenting with a combination of silicon carbide and a cat's whisker.

The recent development of white LEDs has brought them into wider use to replace other white light sources.

  • Instant response LEDs require no warm-up time

  • Greater durability LEDs have no breakable glass or filaments

  • Energy efficiency LEDs use at least 75 percent less energy than incandescent bulbs

  • Longevity and low-maintenance LEDs last 35 to 50 times longer than incandescent bulbs

  • Directional light LEDs can direct light where it is needed far more precisely than incandescent or fluorescent light sources

  • Smaller size LEDs are compact

  • Lower environmental impact LEDs contain no mercury, which means they have a much smaller environmental impact than incandescent bulbs

What Are Other Advantages Of Led Products?

  • The fastest and easiest way to attain state-of-the-art visibility for a nighttime ride

  • Brighter and whiter in color, and provide a superior light pattern over standard incandescent lamps, even under the harshest and most challenging conditions

  • LED Headlamps cast a wide light from curb to curb, with the brightest point where riders need it most

  • The natural daylight lamp color of LED Headlamps is easy on your eyes and is tuned to enhance and amplify the reflective character of highway signs and lane markers

  • Extremely durable and designed for long life on the road

When it comes to Harley-Davidson® lighting products, LEDs are also changing the way riders see and are seen beyond just headlamps:

  • Illuminated Windshield Trim: smoked lenses hide bands of amber LEDs that glow as running lamps when the ignition is on, and the two outer clusters function as auxiliary directional indicators when the turn signals are activated. The wiring is concealed inside the fairing for a clean, custom appearance.

  • LED Bullet Turn Signal Kits: amber or smoked lenses are available for various Harley-Davidson® models. LED turn signals feature fast-acting, extra-bright LEDs that glow a bright amber when functioning as running lights and directional indicators. Most lights install quickly using existing housings and connections; just plug and play.

  • LED Bullet Rear Light Bar: features fast-acting, extra-bright LEDs set in compact, bullet-shaped, die-cast housings. Available with red or smoked lenses, these lamps glow a bright red when functioning as brake lamps, running lights, and directional indicators. The kit includes the Rear Light Bar with integrated downlighting for the license plate, bullet lamp housings, and wiring.


Assume that other drivers can't see you and act accordingly. This will help keep you in a defensive state of mind. After all, you can't do anything to make the drivers around you drive better, but you can do a lot to help make yourself more visible and to ride defensively.

A version of this post appeared in HOG® magazine.